Edge Polisher Equipment

Edge Polisher Equipment(Brush Part)
Edge Polisher Equipment (Brush Part)
Edge Polisher Equipment(Outer)
Edge Polisher Equipment (Outer)
The equipment is used for removal of dendrite attaches on both strip edges.
  1. Both strip edges (about 1.0mm inside from strip edge - UPPER/LOWER) are polished by specially-shaped brush roll.

  2. Wave phenomenon which might happen when strip gauge is thin (under 0.4mm) can be reduced by adjusting support roll position.

  3. The equipment moves from open-limit position to brushing position in high speed by edge detecting device.